Here’s a professional technical guide for selecting cellulose ethers from Botai Chemical’s portfolio for putty powder formulations, with comparative analysis and application-specific recommendations:
Technical Selection Guide: Botai Cellulose Ethers for Putty Powders
Comparative Properties & Optimal Applications
| Property | VAMCELL® HPMC | HEMC/MHEC | HEC |
|---|---|---|---|
| Water Retention (%) | ≥96 (ASTM C1506) | ≥95 | 90-93 |
| Thermal Stability | Gel point: 65-85°C | Gel point: 60-75°C | Gel point: <60°C |
| Ion Tolerance | Moderate | Excellent (high salt/formula) | Poor |
| Alkali Resistance | High (pH 12-14 stable) | High | Moderate (degrades >pH 10) |
| Viscosity Range (mPa·s) | 40,000-200,000 | 50,000-150,000 | 30,000-100,000 |
| Key Strength | Balanced performance/cost | Electrolyte stability | Ultra-smooth finish |
| Limitation | – | Higher cost vs. HPMC | Poor heat/alkali resistance |
Application-Specific Recommendations
▶ 1. Base Choice: VAMCELL® HPMC
Optimal For:
Universal interior/exterior putties
High-temperature regions (≥35°C)
Cement/lime-based formulations
Recommended Grades:
VAM-HPMC-60L: Machine application (60,000 mPa·s, fast-dissolving)VAM-HPMC-100HV: Hand-trowel & vertical surfaces (100,000 mPa·s, anti-sag)
Dosage: 0.2-0.4% of total mix weight
▶ 2. Niche Solution: HEMC/MHEC
Critical Use Cases:
Putties with >3% electrolyte content (e.g., CaCl₂ accelerators)
Marine environments or deicing salt exposure
Gypsum-cement hybrid systems
Advantage: Maintains viscosity in high-ionic environments
▶ 3. Specialty Option: HEC
Selective Use:
Interior decorative putties requiring glass-smooth finish
Non-alkaline systems (e.g., clay-based)
Low-cost formulations (avoid high-humidity areas)
Caution: Not recommended for cementitious/exterior applications
4-Step Selection Protocol
Analyze Formulation Chemistry
Avoid HEC if pH >10 or cement content >15%
Choose HEMC when chloride/sulfate ions >5000 ppm
Define Environmental Demands
Match Rheology to Application
Machine spray: 40,000-60,000 mPa·s (HPMC/HEMC)
Hand application: 80,000-120,000 mPa·s (HPMC)
Ultra-thin coats: HEC (30,000 mPa·s)
Validate Performance
Test adhesion (ISO 4624): Target ≥0.7 MPa
Check crack resistance (EN 15824): ≤0.3% shrinkage
Botai’s Technical Support Advantage
Product Tailoring:
HPMC substitution adjustment (DS 1.6-2.2) for humidity control
Particle size optimization (80-200 mesh) to prevent clumping
Formulation Services:
Free lab testing with customer-specific raw materials
Rheology optimization for pumping/spraying systems
Case Example: A Guangdong putty manufacturer reduced cracking by 40% switching to:
VAM-HPMC-100HV (0.35%) + GRATARD™ Retarder (0.1%)for high-humidity coastal projects.
