Composition: Hydroxypropyl methylcellulose

CAS NO.: 9004-65-3

MPE865 has been developed to improve the workability of Portland cement based dry mortars. MPE865 has good water retention and superior adhesive strength capability. Due to its high viscosity it can be used universally in Economic formulations. It allows manufacturing Economic Tile adhesives ,skim coat and EPS beads insulation mortar with exceptional wrap property to EPS beads and water retention. MPE865 can provides good work ability to those mortar Products.

√ Good water retention 

√ Good thickening efficiency 

√ Very good workability 

√ Very good adhesive strength 

√ Good early strength 

Typical addition level for Tile adhesives, skim coat and EPS beads insulation mortar : 0.3 – 0.6% 

Chemical basis: Methyl hydroxypropyl cellulose Ether 

Appearance: White powder 

Viscosity: approx 65000mPa.s 

PH: 5.0-9.0 

Particle size(through 100mesh): 90% 

Moisture content: max.6.0% 

Bulk density: 200-500g/l 

*2 % solution; on wet basis; Brookfield ,7#20rpm , 20 °C.

Storage

MPE865 is a non-perishable product.The product should be stored under dry and clean conditions in its original packaging and away from heat. The product is hydroscopic. The packaging is selected in a way to avoid ingress of moisture, But the water content of the packed product will / may increase if not stored dry.

Packing 

25kg net paper bags with PE inner liner. On clients’ requirement. 

Product Safety 

According to the EU legislation on dangerous substances and preparations, MPE865 is not hazardous. Further data on the safety aspects of HPMC types are given in the Safety Data Sheet.